Navigation

T.A.C. Total Algae Control, Brandt

Quick overview T.A.C. (Total Algae Control) is an advanced proprietary technology algaecide and bactericide for aquatic management. T.A.C. is a reliable algae control solution for lakes, ponds and reservoirs.

Active Ingredient: Copper Sulfate Pentahydrate 20.0%

EPA Signal Word - DANGER / PELIGRO

T.A.C. (Total Algae Control) Copper Algaecide/Bactericide for Aquatic Management in Lakes, Ponds and Reservoirs


Brandt T.A.C. (Total Algae Control)
is an advanced proprietary technology algaecide and bactericide for aquatic management. Brandt T.A.C. is a reliable solution for lakes, ponds and reservoirs.

 

Brandt T.A.C. has a vertical dispersion rate of 20 feet per hour and a horizontal dispersion rate of 25 feet per hour in still waters. In fl owing water, the dispersion is faster depending on turbulence and velocity of fl ow. Do not apply more than 1.0 ppm as metallic copper. Effectiveness of Brandt T.A.C. decreases as the alkalinity increases and is signifi cantly reduced when the alkalinity exceeds approximately 150 ppm as CaCO3. As alkalinity increases, application rates towards the higher end of stated use ranges may be required.


Do not apply Brandt T.A.C. to water less than 40 ppm alkalinity without fi rst doing a preliminary toxicity test on fi sh in the water. Perform this test in a separate container. Brandt T.A.C. may be very toxic to trout and other species in soft or acidic waters. This preliminary testing is necessary.

Brandt T.A.C. (Total Algae Control) Features

  • Unique formulation allows more free copper ions for the suppression of bacterial odors and toxic gases in ponds containing organic matter or algae/bacteria.  
  • Free copper allows for faster dissipation rate giving a quick knock-down and control  
  • Can be applied at lower dilution rates  
  • Ready to use, EPA registered

Label and SDS

  Product Label

  Product SDS

Product description

T.A.C. (Total Algae Control) Copper Algaecide/Bactericide for Aquatic Management in Lakes, Ponds and Reservoirs


Brandt T.A.C. (Total Algae Control)
is an advanced proprietary technology algaecide and bactericide for aquatic management. Brandt T.A.C. is a reliable solution for lakes, ponds and reservoirs.

 

Brandt T.A.C. has a vertical dispersion rate of 20 feet per hour and a horizontal dispersion rate of 25 feet per hour in still waters. In fl owing water, the dispersion is faster depending on turbulence and velocity of fl ow. Do not apply more than 1.0 ppm as metallic copper. Effectiveness of Brandt T.A.C. decreases as the alkalinity increases and is signifi cantly reduced when the alkalinity exceeds approximately 150 ppm as CaCO3. As alkalinity increases, application rates towards the higher end of stated use ranges may be required.


Do not apply Brandt T.A.C. to water less than 40 ppm alkalinity without fi rst doing a preliminary toxicity test on fi sh in the water. Perform this test in a separate container. Brandt T.A.C. may be very toxic to trout and other species in soft or acidic waters. This preliminary testing is necessary.

Product variants
This product is sold out
Additional information
Manufacturer: Brandt
Product tags
}